Teejet TASC-6600 Instrukcja Użytkownika Pobierz pdf (Strona 7)

1-1

TASC-6000, 6300, 6600

98-05010

Rev. - 1

1.0 SWITCHES AND CONTROLS

MID-TECH

MIDWEST TECHNOLOGIES, INC.

CHEMICAL APPLICATORS

123

OFF

Alt.-

Rate

TASC-6600

TOTAL APPLICATION

SPRAYER CONTROL

%Rate

DISPLAY SELECTOR

Speed

Area

Width

Distance

Chem. Applied

Test

Speed

Prime

Total Applied

Chem. Rate Appl. Rate

CHEMICALS

CARRIER

OFF SET- UP

DEC.

ON OPERATE INC.

123456789

BOOMS

Scan

4 5 6

-Ac

Flow

RATE

Gal./

Display

Mode Selector

Switch

Power Switch

Increase/Decrease

switch

Display

Selector

Switch

Boom Indicators

Injection Pump Switches

1.1 POWER SWITCH

The power switch controls power to the console. The console has an "Auto Power Down" feature which powers the

console off after an operator selectable time (default is 30 min) has elapsed. The console has a nonvolatile memory so it

"remembers" the constants and data previously entered, even if the power is removed.

NOTE: The “Auto Power Down Feature is only available on the CE version of the console (CE designation label on back

of console).

1.2 MODE SELECTOR OPERATE/SET- UP SWITCH

The Mode Selector switch (upper right) is used to switch between the OPERATE and SET-UP modes. When spraying,

this switch must be in the OPERATE position. The SET- UP position is used for entering information into the console.

In the SET-UP Mode, all pump operations (except calibration) are turned off and an Err message appears if a position

which can not be programmed is selected.

1.3 INC/DEC SWITCH

The INC/DEC switch (upper right) is used to adjust the values appearing in the display. The INC/DEC switch is used in

both OPERATE and SET-UP Modes.

This switch is also used to zero the accumulated areas, distance, and volumes by selecting the desired display and

holding this switch in the DEC position until the display resets to zero, (approximately 3 sec).

1.4 DISPLAY SELECTOR

The Display Selector (right center) is used to select the various console functions that are to be displayed and adjusted.

1 2 3 4 5 6 7 8 9 10 11 12 ... 77 78

Komentarze do niniejszej Instrukcji

Brak uwag

Teejet TASC-6600 Instrukcja Użytkownika Strona 7

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Komputery Teejet TASC-6600