Teejet IC18 SPRAYER JOB COMPUTER Instrukcja Użytkownika Pobierz pdf (Strona 19)

www.teejet.com

OVERVIEW SETUP APPENDIXGETTING STARTED OPERATION

ISOBUS Job Computer : IC18 Sprayer

MACHINE

Machine congures machine settings. Options include Filling, Operation, Implement Parameters, Calibrations,

Alarm Congurations and OEM.

MAIN SETUP MODE MENU STRUCTURE

| | | | | |

Counters Job Parameters Machine User Interface Communication Help

Filling

Operation

Implement parameters – Section width

Implement speed sensor – Calibrations Nozzle preset setup

Flow sensor Alarm congurations Regulation parameters

OEM

The OEM setup menu is password protected and the settings in this menu are directly related to the tted OEM equipment.

Figure 3-12: Machine

1. From the Main Setup Screen , select MACHINE.

2. Select from:

►Filling – establishes the amount of material remaining in the tank and the

density of that material.

►Operation – establishes Application Rate Step, Speed Source, and

Simulated Speed.

►Implement Parameters – establishes the Section Width, Nozzle Preset

Setup and Regulation Parameters.

►Calibrations – establishes either manual or automatic settings of the

sensors.

►Alarm Congurations – establishes alarms for CAN Speed Source Timeout,

Active Trip Count Information mode and Tank Content Minimum

►OEM – The OEM setup menu is password protected and the settings in this

menu are directly related to the tted OEM equipment. Refer to the OEM Manual for information regarding OEM settings.

NOTE: Settings are NOT automatically saved when selected. The ACCEPT KEY must be selected to save the setting. Select the

ESCAPE KEY to escape without saving settings and return to the previous menu.

Filling

Figure 3-13: Filling

Filling establishes the amount of material remaining in the tank and the density of

that material.

Different options will be available depending on if a tank sensor is installed.

NOTE: The size of the tank is established in the OEM menu. This is the number

that will repopulate when the Full Tank Key is pressed.

Actual Content

Actual Content displays the current volume of content in the tank. The volume can

be manually adjusted.

• To adjust the volume, use the number pad or slide bar.

NOTE: When a tank sensor is active, the actual content can not be changed

manually.

Density

Density establishes the density of the material being applied. It can be set to either

“fertilizer” or “water”.

• To select the Density, select an option from the drop down menu or use the

UP/DOWN ARROWS to highlight the option.

NOTE: If “Fertilizer” is selected, a Density Factor option appears.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 42 43

Komentarze do niniejszej Instrukcji

Brak uwag

Teejet IC18 SPRAYER JOB COMPUTER Instrukcja Użytkownika Strona 19

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Komputery Teejet IC18 SPRAYER JOB COMPUTER