Teejet IC18 SPREADER JOB COMPUTER Instrukcja Użytkownika Pobierz pdf (Strona 18)

www.teejet.com

OVERVIEW SETUP APPENDIXGETTING STARTED OPERATION

ISOBUS Job Computer : IC18 Spreader European

Operation

Figure 3-17: Operation

Figure 3-18: Implement parameters

Figure 3-19: Fast Empty Key

Operation establishes Speed Source and Simulated Speed.

Speed Source

Speed Source selects whether to base the machine’s speed on input from the

CAN, an Implement or a Simulated source. Selecting “Implement” will allow for

the conguration of pulses per 100 meters. Selecting “Simulated” will allow for

simulated speed to be entered using the “Edit Value” option. Selecting “CAN”

allows for speed being supplied by the ISOBUS CAN (usually from the TECU) to be

used.

• To select the Speed Source, select an option from the drop down menu or use

the UP/DOWN ARROWS to highlight the option.

NOTE: If “Implement” is selected, refer to the Calibrations section for further

instructions.

Simulated Speed

Simulated Speed establishes a speed to be used when using the Simulated Speed

source.

• To select the Simulated Speed, use the number pad or slide bar.

Implement Parameters

Implement Parameters establishes the the Working Width, Fast Empty Bed RPM

and Master Switch location.

Working Width

Working Width establishes the desired distance between each adjacent pass while

spreading.

• To select the Working Width, use the number pad or slide bar.

Fast Empty Bed RPM

Fast Empty Bed RPM establishes the revolutions per minute of the roller used to

drive the conveyor during the Fast Empty.

• To select the RPM, use the number pad or slide bar.

The availability of Fast Empty is established in the OEM menu under Program

Modes. When set to "On", the Fast Empty Key will be available on the Home

Screen.

Master Switch

Master Switch is used to allow the operator to choose between a “remote master”

switch or the Start/Stop Key.

• To select the Master Switch, select an option from the drop down menu or use

the UP/DOWN ARROWS to highlight the option.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 31 32

Brak uwag

Teejet IC18 SPREADER JOB COMPUTER Instrukcja Użytkownika Strona 18