Teejet IC18 SPREADER JOB COMPUTER Instrukcja Użytkownika Pobierz pdf (Strona 25)

98-05271 R0 UK

OVERVIEWSETUPAPPENDIX GETTING STARTEDOPERATION

ISOBUS Job Computer : IC18 Spreader European

CHAPTER 4 – OPERATION MODE

The Operation Screen accesses the working aspects of the IC18 including boom section control, rate control and trip/count/

application information.

NOTE: Settings are automatically saved when selected.

NOTE: The menu structure on your display might vary from the one displayed in this User Manual depending on the virtual

terminal being used.

EUROPEAN OR NORTH AMERICA CALCULATION MODE

The IC18 job computer is programed to calculate calibrations based on European or North American methods.

◄European – Gate Height is NOT calculated into the product application and calibrations will be based on volume per pulse.

◄North America – Gate Height is calculated into the product application and calibrations will be based on pulses per volume.

This setting has been established before leaving the factory, but it can be changed after purchase with assistance from TeeJet

Technologies Customer Service or your local dealer through the OEM setup menu options.

OPERATION MODE OVERVIEW

Information on the Operation screen will vary depending on the parameters set by the user and the OEM.

Figure 4-1: Operation Mode Screen Overview

Cnt 1

0.0 500

298.2 t

1.14 ha

1311

kg/hakg/m

0RPM RPM

Rolr Spnr

Count Number

Remaining Bed Content

Speed/Application Information

Alert Warning

Application On/Off Indication

Roller RPM

Applied Volume Applied Area

Spinner RPM

Extra Key Spaces

Home Key

Information Key

Master Screen Key

Start/Stop Key

Keys Descriptions

Icon Description

Home Key Press to return to the Home Screen

Information Key Press to toggle between display modes

Start/Stop Key Press to start or stop spreader

Section and Icon Descriptions

Section or Icon Description

Job Information This information bar displays the active count number,

applied volume and applied area

Cnt 1 0 t 0.00 ha

Count Number Displays the current active trip or job number

Applied Amount Displays amount applied for the selected count number

Applied Area Displays applied area for the selected count number

Speed/Application

Information

Displays vehicle speed or amount applied per minute or RPM.

The Information Key toggles between display modes.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 31 32

Komentarze do niniejszej Instrukcji

Brak uwag

Teejet IC18 SPREADER JOB COMPUTER Instrukcja Użytkownika Strona 25

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Komputery Teejet IC18 SPREADER JOB COMPUTER